Maricopa County’s tally printer source, OKI Data Americas, just recently reacted to the County’s sham tally printer examination, exposing incorrect claims and requiring a fixed report from the Maricopa County Attorney’s Office.
According to OKI’s declaration, Maricopa County did not even get in touch with the business, and they were “ entirely uninformed that an examination was underway.”
The Gateway Pundit reported on Maricopa County’s Ballot-on-Demand Printer Investigation led by previous Arizona Supreme Court Justice Ruth McGregor.
As The Gateway Pundit reported, previous Ohio Secretary of State Ken Blackwell later on required effects for the taken Maricopa County Midterm Election and the “cover-up” examination by election authorities.
It appears from OKI’s action that on election day and prior, Maricopa County did not properly carry out tests and even check out the printer handbook. This rejects the whole examination by Maricopa County. They either lied or were so unskilled that they could not follow fundamental directions. What else did they conceal?
OKI composes, “ Without explanation in the screening procedure that specifies the specific paper type and the printing source (multipurpose tray or cassette), the conclusion is disingenuous provided the truth that using 100 pound. paper can be out of spec for the B432 printers, as can be recognized easily from the printers’ handbook.”
According to Maricopa County’s report, “Maricopa County printed its tallies on 80- pound paper for the 2020 main and basic elections” however increased paper weight to 100 pounds in2022 OKI states in their reaction, “the optimum paper weight through the paper cassettes is 80 pound. text (120 g/m2).” Oki concludes, “it appears that the real underlying reason for the election concerns was using 100 pound. paper without examining the handbook and/or verifying with OKI that such usage was within the specs of the OKI B432 printers.”
Maricopa County’s report in fact acknowledges, “the combined result of utilizing 100- pound tally paper and a 20- inch tally throughout the 2022 basic election was to need that the Oki B432 printers carry out at the severe edge of their ability, a level that might not be dependably sustained by a significant variety of printers.” They later on declare that “regardless of the guarantees of the maker, a number of the Oki B432 printers were not efficient in dependably printing 20- inch tallies on 100- pound paper under election-day conditions.”
However, OKI describes this claim of “guarantees by the producer” as “another prospective accurate mistake,” eventually concluding the County and their “private investigators” most likely did not check out the printers’ handbook. ” Had the County spoke with OKI prior to such usage, the style specs would have been gone over and options might have been checked out,” mentions the action.
As The Gateway Pundit reported, another worrying aspect of this report states that OKI B432 printers “revealed speckling at the edge of the tally” throughout pre-election tension screening, which might have disrupted the timing marks on tallies. Regardless of this discovery being made in September 2022, Maricopa County progressed anyhow. They understood these were concerns would develop.
This brand-new proof might bring much more life to Kari Lake’s lawyers’ claims that voting devices were privately reprogrammed and fraudulently licensed prior to the 2022 Election in Maricopa County. The Gateway Pundit reported on brand-new proof and video footage that reveals Maricopa County staff members reprogramming the ballot makers on October 14 th, 17 th, and 18 th, after their statutory Logic and Accuracy screening, so that 59% of them would stop working when Republican citizens was available in to vote on Election Day in 2022.
Voting maker specialist and Kari Lake professional witness Clay Parikh just recently signed up with The Gateway Pundit for an interview to discuss the brand-new video proof of unlawful device setups that triggered the wide-scale ballot maker failures on Election Day in Maricopa County.
Lake’s lawyers have submitted a Notice of Appeal versus Judge Peter Thompson’s current judgments, dismissing her suit and proof of rigged ballot makers prior to trial. They prepare to take their difficulty all the method to the United States Supreme Court.
Kari Lake lawyer Bryan Blehm shared the OKI report tweeting, “The issue with informing many lies is they will ultimately come out. Maricopa County elections & & chosen authorities have actually informed a lot of lies. It is time this election was revoked due to the fact that it is clear election day citizens were deliberately hindered.”
” OKI will continue to support our election provider and counties across the country that depend on OKI printers to satisfy their tally printing needs, & & we anticipate a remedied report being provided by the Maricopa county Attorney’s Office.”– OKI #KariLake Experts Vindicated https://t.co/lWG7CBgyGE
— Bryan Blehm (@BlehmLawAZ) June 8, 2023
OKI provided a news release on its site refuting the findings of Maricopa County’s deceitful and careless examination.
This was initially reported by The Recycler Not a single leftist media outlet has actually reported on this, regardless of all reporting that Maricopa County’s “examination” was impartial and precise.
The Gateway Pundit was among the only outlets to call the examination specifically what it was: a sham!
From OKI:
On Monday, April 10, 2023, a report that was commissioned by the Maricopa County Attorney’s Office to examine printer problems associated with the November 2022 basic election was launched openly. OKI was not called by Maricopa County authorities, examination groups dealing with their behalf, election providers, or any other celebrations related to the examination at any time throughout the examination. OKI was totally uninformed that an examination was underway.
After examining the report after its public release OKI has actually kept in mind accurate mistakes in the released report and has actually called the Maricopa County Attorney’s Office to ask for that these findings be modified. We have actually released the accurate mistakes and OKI’s reaction listed below.
OKI Response to Factual Errors (887 KB)OKI reacted to 3 declarations from the report, calling them “factually incorrect.” The action continues, “ We think that all of these mistakes would have been prevented had the investigatory group just gotten in touch with OKI in advance of the report’s release.” The business likewise suggested that more frauds were discovered however they would not be reacting to each different problem from the 38 page report.
From the reaction:
Factual Errors:
1. Page24– FuserReplacement
Report Statement, “The fuser insufficiency on some printers is not an issue quickly fixed, as the fuser on the Oki B432 can not be individually changed.”
OKI Response: The fuser for the B432 remains in truth readily available for replacement and can be altered onsite by a printer service technician. The printer itself does not require to be changed on the occasion that the fuser stops working.
2. Page 24– Product Support Period
Report Statement, “That issue [declared failure to independently change the fuser] is additional intensified by the truth that the Oki B432 maker, which has actually withdrawn from the North and South American markets, has actually developed December 31, 2025 as completion of life for these printers, after which repair work parts and consumables will no longer be produced.”
OKI Response: Not just is the declaration about fuser replacement unreliable, the time horizon for service/support kept in mind in the report is inaccurate. OKI ceased sales of OKI-branded printers in March2021 OKI will comply with our legal responsibilities to support printers in the field with consumables and extra parts for a minimum of (5) years after item discontinuation. In the particular case of the B432 design, OKI will continue to provide consumables and extra parts for this design through a minimum of March 31, 2028.
3. Page 26– Purported “Assurances” from the Manufacturer
Report Statement, “Despite the guarantees of the maker, a lot of the Oki B432 printers were not efficient in dependably printing 20- inch tallies on 100- pound paper under election-day conditions.”
OKI Response: The examination report relies greatly on another prospective accurate mistake– that is, that the OKI B432 printers were created to deal with 100 pound. paper– to conclude that the problems in the election were brought on by devices failure. While the B432 printer supports paper weights of as much as 110 pound. text (162 g/m2) through the multipurpose tray, the optimal paper weight through the paper cassettes is 80 pound. text (120 g/m2). In addition, 100 pound. cover (271 g/m2) would be well out of specification for both the multipurpose tray and cassettes. Without explanation in the screening procedure that specifies the specific paper type and the printing source (multipurpose tray or cassette), the conclusion is disingenuous offered the reality that using 100 pound. paper can be out of spec for the B432 printers, as can be determined easily from the printers’ handbook. As an outcome, it appears that the real underlying reason for the election concerns was using 100 pound. paper without examining the handbook and/or validating with OKI that such usage was within the requirements of the OKI B432 printers. Had the County sought advice from OKI prior to such usage, the style requirements would have been talked about and options might have been checked out.
OKI printers have actually been effectively released in election applications for several years, supplying constant, reputable efficiency as long as the printers are used within released requirements. OKI will continue to support our election companies and counties across the country that count on OKI printers to fulfill their tally printing needs, and we anticipate a fixed report being released by the Maricopa County Attorney’s Office.
This was not an examination, it was a cover-up.
The post NEW BOMBSHELL: OKI Ballot Printer Company Sends DAMNING “Response to Factual Errors in Maricopa County Elections Report” Debunking Maricopa County’s Lies About Ballot Printer Failures– LEFTWING MEDIA SILENT appeared initially on The Gateway Pundit
This article may have been paraphrased or summarized for brevity. The original article may be accessed here: Read Source Article.
![president-trump-gives-barron-a-shout-out-at-inaugural-parade:-his-unexpected-response-is-pure-gold!-[video]](https://news.lateawakening.com/wp-content/uploads/2025/01/35545-president-trump-gives-barron-a-shout-out-at-inaugural-parade-his-unexpected-response-is-pure-gold-video-100x70.jpg "President Trump Gives Barron A Shout Out At Inaugural Parade: His Unexpected Response is Pure Gold! [VIDEO]")
